Click here to buy some Tibia gold in our shop

Results 1 to 6 of 6

Thread: Tibia 11 - The procedure to find new memory addresses (paths)

  1. #1
    Join Date
    Aug 2006
    Location
    Spain
    Posts
    1,296

    Cool Tibia 11 - The procedure to find new memory addresses (paths)

    The procedure to find addresses in Tibia 11:
    1. Search what you want while your player is playing, using the old procedure. That is: you start a search with an known value (faster) or with unknown value, then you change something in your player, you search next, you change something, you search next... until only 1 value is remaining. You obtain a final address.
    2. Do pointer scan over that obtained final address. You should obtain a huge list of possible paths. Don't close this list.
    Best settings for most cases:


    3. Close Tibia 11, open it again, and login a player again.
    4. Reattach Tibia 11 to Game Cheat, and repeat only (1) so you obtain a new (different) final address.
    5. Go back to the obtained list in (2) and go Pointer scanner>Rescan memory. Enter new final address. Enable Repeat rescan until stopped. Press ok to start filtering.
    6. Walk a bit,change floor and do some actions with your player. Around 15 seconds should be enough to filter a lot of address.
    7. Go back to the list and press "Stop rescan loop". Now you should have less address.
    case 7a. If they are still a lot then repeat everything from point (3)
    case 7b. If the list is small (<20 address) then test the shortest paths (less steps) that start at a .dll because they are usally the right ones. In some cases you always get a few valid path solutions.
    8. Test the obtained path solutions in a different computer with a different windows version, in order to discard paths that depends on operative system.

    I am the admin. To contact me, send me an email to daniel@blackdtools.com
    Don't send pms to me! I rarely read pms. Just email me instead!

  2. #2
    Join Date
    Sep 2008
    Posts
    4

    Default

    Quote Originally Posted by blackd View Post
    The procedure to find addresses in Tibia 11:
    1. Search what you want while your player is playing, using the old procedure. That is: you start a search with an known value (faster) or with unknown value, then you change something in your player, you search next, you change something, you search next... until only 1 value is remaining. You obtain a final address.
    2. Do pointer scan over that obtained final address. You should obtain a huge list of possible paths. Don't close this list.
    IMPORTANT - Settings:
    - Uncheck "Don't include pointers with read-only nodes"
    - Uncheck "Addresses must be 32-bit aligned"
    3. Close Tibia 11, open it again, and login a player again.
    4. Reattach Tibia 11 to Game Cheat, and repeat only (1) so you obtain a new (different) final address.
    5. Go back to the obtained list in (2) and go Pointer scanner>Rescan memory. Enter new final address. Enable Repeat rescan until stopped. Press ok to start filtering.
    6. Walk a bit,change floor and do some actions with your player. Around 15 seconds should be enough to filter a lot of address.
    7. Go back to the list and press "Stop rescan loop". Now you should have less address.
    case 7a. If they are still a lot then repeat everything from point (3)
    case 7b. If the list is small (<20 address) then test the shortest paths (less steps) that start at a .dll because they are usally the right ones. In some cases you always get a few valid path solutions.
    8. Test the obtained path solutions in a different computer with a different windows version, in order to discard paths that depends on operative system.
    Hi,
    I can't find any address. In old tibia I just:
    1. Open Tibia
    2. Log into the game
    3. Open cheat engine and select Tibia from processess
    4. Write in Cheat Engine example 3385 (ID of crown helmet) to find helmet address, next change to dark helmet and write 3844 then click next scan and I had a pointer for helmet.

    Now when I write 3385 I have huge list with addressess, when I change to dark helmet, change id to 3844 and click next scan i have no results...

    WHat im doing wrong?
    anyway i can't find in chean engine "IMPORTANT - Settings:
    - Uncheck "Don't include pointers with read-only nodes"
    - Uncheck "Addresses must be 32-bit aligned"" where is it?


    I found now address : 6FCC129A for helmet, is it correct? also I dont know what i click,cause nowi cant' find them again lol
    Last edited by Maches; 10-28-2016 at 12:44.

  3. #3
    Join Date
    Aug 2006
    Location
    Spain
    Posts
    1,296

    Default

    You can find the address for the current session using old tactics.
    However, that address will only be valid in your machine until you close Tibia.
    Nowadays your goal is obtaining universal paths to obtain that dynamic address so you need to do the procedure several times [open tibia, find current address, close tibia]
    until you only havew few paths remaining. Such paths should work for any future session of Tibia, in any machine.


    And finally, answering to your last question: No, there is not a single short address in tibia 11 like that. Everything are paths now.
    And in the case of the helmet, I could bet it is now part of a collection of equipment slots. You will need to search that collection start. However, it should be a static collection, so obtaining a path there is still possible. But you can expect it to be a very long path (maybe with 9, 10 or 11 steps)

    I am the admin. To contact me, send me an email to daniel@blackdtools.com
    Don't send pms to me! I rarely read pms. Just email me instead!

  4. #4
    Join Date
    May 2017
    Posts
    3

    Default

    "1. Search what you want while your player is playing, using the old procedure. That is: you start a search with an known value (faster) or with unknown value, then you change something in your player, you search next, you change something, you search next... until only 1 value is remaining. You obtain a final address."

    When I try to search for any value, nothing appears, even when I enter "unknown initial value". Would you help me?
    (Google translator)

  5. #5

    Default

    Thank you for the useful information.The described way is very beneficial to grab the procedure.

  6. #6

    Default

    appsnigeria.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •